Expanded Product List
Master Bond Product Search
436 products match
 |
EP31ND Non-drip structural epoxy adhesive. Paste consistency. Gap filling. Unmatched peel and shear strength. Tough and resilient. Protects against exposure to water, oil, fuels. Cures at room temperature. Service temperature range from -60°F to +250°F. |
 |
EP31T Epoxy adhesive has extraordinary shear and peel strength. Superb electrical insulator. Excellent chemical resistance. Optically clear. Service temperature range -60°F to +250°F. Low shrinkage upon cure. Room temperature curing. |
 |
EP33 Meets MIL-STD-883J Section 3.5.2 for thermal stability. Room temperature curing system. One one mix ratio by volume. Superb chemical resistance and dimensional stability. Shore D hardness 85-90. Suitable for bonding, sealing, coating. Withstands 1,000 hours 85°C/85% RH. Serviceable from -60°F to +450°F. Easily machinable. |
 |
EP33CLV Room temperature curing epoxy adhesive features high thermal stability. Excellent chemical resistance properties. High bond strength. Volume resistivity o >1014 ohm-cm. Withstands thermal cycling. Serviceable from -60°F to +450°F. Successfully tested for 1,000 hours 85°C/85% RH. One to one mix ratio by volume. Low viscosity. |
 |
EP33LV Convenient one to one mix ratio by volume. Service temperature range -60°F to +450°F. Cures at room temperature. Moderate viscosity. Outstanding dimensional stability. Reliable electrical insulator. Robust chemical resistance. |
 |
EP33ND Non-drip thixotropic epoxy paste. Demonstrated radiation stability at high radiation dosages. Serviceable from -60°F to +450°F. Gap filling. One to one mix ratio by volume. Adheres well to similar and dissimilar substrates. Cures at ambient temperatures. Post cure to optimize properties. Readily machinable. |
 |
EP34 Two component, high temperature resistant epoxy adhesive, sealant, coating. Top notch electrical insulator. Dimensionally stable. Easily machinable. High strength system. Service temperature range from -60°F to +450°F. |
 |
EP34CA Resists -80°F to +500°F. Two component epoxy system. Long open time. Good flow properties. Can cure in section exceeding 1/4 inch thick. Withstands 1,000 hours 85°C/85% RH. Protects against aggressive chemical exposure. |
 |
EP35 High viscosity epoxy adhesive offers excellent thermal stability. Serviceable from -60°F to +450-500°F. Durable. High strength bonds are maintained even after long-term exposures to elevated temperatures. Outstanding resistance to chemical exposure. |
 |
EP35SP High temperature resistant epoxy system. Withstands exposure to aggressive chemicals. Paste viscosity. 100 to 50 mix ratio by weight. Service temperature range -80°F to +550°F. Excellent compatibility with filament winding and bonding composites. |