High viscosity ethyl cyanoacrylate for bonding applications for use with medical devices
Key Features
- One component, no mix system
- Rapid fixture time
- Meets USP Class VI specifications
- Passes ISO 10993-5
Product Description
Master Bond MB297Med is a single component ethyl cyanoacrylate type adhesive. This high strength, rapid curing system is used primarily for medical device assembly. MB297Med is a higher viscosity (2,200-2,400 cps) cyanoacrylate. This kind of system, which is commonly referred to as an instant adhesive or super glue, cures very rapidly with the rate of cure dependent upon the humidity—the higher it is, the faster the cure. Because curing is normally so fast, minimal contact pressure is usually sufficient for bonding. It must be emphasized that this high strength system requires no heating or mixing. It typically sets up within 20-50 seconds depending upon the humidity and the substrates. The bond strength is exceptionally high in the shear mode. MB297Med bonds well to a variety of substrates especially metals, plastics and rubbers. The service temperature range for this system is -60°F to +250°F. Most importantly, MB297Med meets USP Class VI specifications for biocompatibility. MB297Med can be used in a wide array of different medical applications ranging from repair to high speed production. It has first rate resistance to EtO and gamma sterilization processes. Although many of the applications for MB297Med involve disposable type medical devices, it also can be utilized with reusable ones depending upon the service conditions.
Product Advantages
- Fast setting at room temperature
- No heating or mixing
- Contact pressure is usually sufficient for fixturing
- Bonds well to a wide variety of substrates
- Excellent resistance to EtO and gamma sterilization
- Passes USP Class VI and ISO 10993-5 testing (best results when used with accelerator)
Industrial Certifications
Packaging
MB297Med is available is various sizes and units to accommodate customer's needs.
