How to Choose the Right Adhesive for your Medical Device Application

Thank you for attending the webinar!

Here are some useful resources including videos, technical articles and products that were highlighted in the webinar.

Catalogs

Case Study Citations and Sources

Case Study 1 - EP21LVMed
An Implantable Device for Electrical Nerve Stimulation

Case Study 2 - MasterSil 151Med
An Implantable Device for Electrical Nerve Stimulation

Case Study 3 - EP42HT-2Med
Fabrication and Packaging of a Fully Implantable Biosensor Array.

Case Study 4 - EP3HTMed
Relative biological effectiveness (RBE) of alpha radiation in cultured porcine aortic endothelial cells .

Case Study 5 - EP30Med
Multi-channels wireless strain mapping instrument for total knee arthoplasty with 30 microcantilevers and ASIC technology.

Case Study 6 - MasterSil 912Med
Chronically-implanted Neuropixels probes enable high yield recordings in freely moving mice.

Products mentioned in case studies

	EP21LVMed Biocompatible two component epoxy adhesive, sealant, coating, encapsulant. Passes USP Class VI testing. Thermal cycling resistant. Can withstand exposure to EtO, radiation, chemical sterilants. Low viscosity. Easy to apply. Serviceable from -65°F to +250°F.
	MasterSil 151Med Medical grade, USP Class VI approved silicone. Addition type cure system. Optically clear. Low outgassing. Offers ambient or elevated temperature cures. Excellent for potting and encapsulation applications. Low shrinkage upon cure. Resists gamma radiation, EtO and various chemical sterilants. Serviceable from -65°F to +400°F.
	EP42HT-2Med Low viscosity, two part epoxy with outstanding chemical resistance. Passes USP Class VI biocompatibility tests. Capable of withstanding repeated sterilization cycles including radiation, EtO, chemical sterilants, autoclaving. Serviceable from -60°F to +450°F. Cures at room or elevated temperatures. Available in amber-clear and black colors. Castable in thicknesses up to 2-3 inches.
	EP3HTMed Rapid curing, one part epoxy. Meets USP Class VI biocompatibility standards. Thixotropic paste viscosity. High shear strength. Superb resistance to autoclaving, chemical sterilants, radition, EtO. Serviceable from -60°F to +400°F.
	EP30Med Biocompatible two component epoxy. USP Class VI approved. Low viscosity. Versatile cure schedules. Resists EtO, gamma radiation and cold sterilants. High strength rigid bonds. Serviceable from -60°F to +250°F. Can be used for indirect food contact per 175.105 FDA specification.
	MasterSil 912Med Single component silicone with a paste viscosity for bonding, sealing and coating medical devices. Non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. Resists many kinds of sterilization including gamma and other types of radiation, EtO and some types of liquid sterilants.